K-8000C SD Card LED Controller – 8-Port, 8192 Pixels, Scalable Control — Buyer Guide

K-8000C SD Card LED Controller – 8-Port, 8192 Pixels, Scalable Control

The K-8000C is an 8-port SD card LED controller built for large-scale lighting projects that demand high pixel capacity, reliable standalone playback, and room to grow. Supporting up to 8192 SPI pixels or 4096 DMX pixels, it gives integrators and wholesalers a single, scalable control solution for facades, stadiums, and media walls.

Massive Pixel Capacity in a Single Unit

The K-8000C drives up to 8192 SPI pixels (1024 pixels per port across 8 ports) or 4096 DMX pixels. That headroom means fewer controllers per installation, simpler wiring, and easier project management.

• Up to 8192 SPI pixels (1024 pixels/port × 8 ports)
• Up to 4096 DMX pixels
• Suitable for large-scale facade, stadium, and media wall projects

8 Independent Output Ports

Eight independent output ports enable flexible large-scale installations and reduce the need for multiple controllers. Each port can be configured to match the layout of your project, whether you are running long runs across a building face or distributing pixels across a wide media wall.

• 8 independent output ports
• Flexible mapping for complex installations
• Fewer controllers required per project

SD Card Playback for Standalone Operation

The controller stores up to 32 effect files on an SD card (128MB – 32GB), allowing standalone operation without a live PC connection. This is ideal for permanent installations where reliability and simple maintenance matter.

• Stores up to 32 effect files
• SD card capacity: 128MB – 32GB
• Standalone playback without a computer

Precise Grayscale Control

With 32 to 65536 grayscale levels and gamma correction, the K-8000C delivers smooth, accurate color rendering. This is especially important for media walls and architectural lighting where gradients and fades are visible to the audience.

• 32 to 65536 grayscale levels
• Gamma correction for accurate color
• Smooth gradients and fades

Flexible Control and Cascading

The K-8000C can be used as a single controller or cascaded with multiple units via optical isolation, with up to 150m between units. This makes it practical to scale a project across large distances without signal degradation.

• Single-controller or cascaded operation
• Optical isolation between units
• Up to 150m between cascaded units

Broad IC Compatibility

The controller supports a vast range of LED driver ICs, with flexible selection via software or the CHIP button. This compatibility simplifies sourcing and lets you work with the ICs already specified in your project.

• Wide LED driver IC support
• Selection via software or CHIP button
• Reduces compatibility risk across projects

Enhanced Signal Output

485 TTL and 485 differential (DMX) signal outputs provide stable long-distance transmission. This helps maintain signal integrity in large venues where cable runs are long and interference is a concern.

• 485 TTL output
• 485 differential (DMX) output
• Stable long-distance transmission

DMX Address Writing

The K-8000C supports address writing for DMX512 lighting ICs, with one-key address setting via LedEdit-K software. This speeds up commissioning and reduces setup errors on site.

• Address writing for DMX512 lighting ICs
• One-key address setting via LedEdit-K software
• Faster commissioning and fewer setup errors

Built-in Test Patterns

Built-in test effects (color jump, gradient, fade) support quick setup and troubleshooting. Technicians can verify wiring and pixel response before running full playback.

• Color jump, gradient, and fade test effects
• Quick setup verification
• Simplified troubleshooting

Advanced Options

For scheduled and synchronized installations, the K-8000C supports GPS synchronization and timing (holidays) playback. This is useful for events and permanent installations that need to run on a schedule.

• GPS synchronization
• Timing (holidays) playback
• Suitable for scheduled events

Who It Is For

The K-8000C is aimed at overseas buyers, integrators, and wholesalers who need a scalable, standalone-capable LED controller for demanding projects. Its combination of high pixel capacity, 8-port output, SD playback, and broad IC support makes it a practical choice for large-scale facade, stadium, and media wall installations.

• For integrators and wholesalers
• Scalable for large projects
• Standalone SD playback and cascading support

For wholesale pricing and availability, please contact our sales team.